FlexSym-ONT205-Installation-Guide
Page 24 of 38
Physical Mount
Desktop Mount
The FlexSym 205 can simply be placed on top of a desk, a table, a shelf, or any similar
object. An optional Wall Mounting Bracket can be used to store excess fiber cable
length under the ONT as it sits on a desk or other surface.
Surface Mount
The FlexSym 205 can be attached to a wall, to the top, back, or underside of a desk or
table, or to some other surface using the optional Wall Mounting Bracket and screws.
Note:
Make sure that the owner of the building or the owner of the individual unit or
furniture is aware that holes will be drilled and screws and/or wall anchors will be
used to mount the ONT to a wall or to furniture before beginning installation.
Before mounting the FlexSym 205, find the place where the ONT will be mounted and
decide how it should be orientated for best access and ease of use. Consider that up to
8 cables may be attached to the rear edge of the ONT, either just after installation or
some time later. Also consider that it may be helpful if the user can see the LED
Indicators on the top of the unit.
Mounting The Bracket
1.
Place the Wall Mounting Bracket on the surface it will be attached to. Position the
bracket so that is will hold the ONT in the desired orientation, being aware that
the long edge of the bracket that has the entrance and exit holes for the optical
fiber cable should be at the back of the ONT (near the connectors).
