4
2.2 Setting parameters through modem connection
For this a GSM modem is required (TELL GT64 recommended). GSM data call (CSD)
service must be activated on the SIM cards placed in the modem and in the module.
Start the „
GSM Pager3 Z6 Remoter
” software and select
Connection
page
Select the option of connecting the module via modem connection
Select the port where you have connected the modem
Enter the phone number of the SIM card placed in the Pager3 module
Press „
Establish
modem connection
” button
As soon as the program has connected to the module, it will request the module
password, establish connection and then a green tick icon appears next to the USB
icon in the upper right corner of the main window, then the module version is
displayed. (The program does not request the module password if the default
password is set in the module:
1111
)
When configuration of the settings is finished, close the connection by pressing the
“
Close modem connection
” button.
2.3 Module status monitoring
To monitor the module, select “
Module status
” tab.
Z1, Z2, Z3, Z4, Z5 and Z6
: the current state of the six inputs is displayed here:
opened or closed, respectively if this is default state or not (depending on the setting).
RELAY 1:
the current state of the relay output is displayed here. Activation of the
relay can be performed using „
Start
” button (the relay remains activated for the period
adjusted at relay settings), then active state will restore, or can be immediately
restored by pressing „
Stop
” button.