background image

 

11

2.5.4.1  Setting phone numbers through SMS 

The phone numbers can be set, replaced or erased also by sending an SMS to the 
module's SIM card from phone numbers configured in the module, containing the 
following commands: 
 

Setting 

SMS command 

Specification 

Module response

User phone 
numbers 

U

X

=

phone number

#

 

Substitute "X" with the 
ordinal number of the 
user phone number 
wished to be set or 
replaced (1,2,3 or 4) 

USER PHONE 
NR. CHANGED. 

Monitoring 
station phone 
numbers 

C

X

=

phone number

#

 

Substitute "X" with the 
ordinal number of the 
monitoring station phone 
number wished to be set 
or replaced (1 or 2) 

CENTRAL 
PHONE NR. 
CHANGED. 

Phone numbers 
for SMS 
forwarding  

S

X

=

phone number

#

 

Substitute "X" with the 
ordinal number of the 
SMS forwarding phone 
number wished to be set 
or replaced (1 or 2) 

SMS FORWARD 
NR. CHANGED. 

U

X

=#

USER PHONE NR. 
CHANGED.

 

C

X

=#

CENTRAL PHONE 
NR. CHANGED.

 

Erasing 
previously set 
phone numbers 

S

X

=#

Substitute "X" with the 
ordinal number of the 
phone number wished to 
be erased (1-4 for users, 
1-2 for others) 

SMS FORWARD NR. 
CHANGED.

 

 

The commands are also accepted by the module from phone numbers which are not 
configured in the module, but in this case the module password is requested to be entered 
in the command after the parameters, in the following way: 
e.g. 

U

X

=

phone number

, PWD=1111#

 . The procedure is the same if the command is 

sent from a phone number which is set in the module, but for which "0 - None." option is 
assigned at Caller ID setting, because with this setting the given phone number is 
considered unauthorized to perform remote settings, therefore password is required. 

 

Commands must always start with star "

" and respectively end with hash "

#

" character. It 

is also possible to send more commands in one SMS, but the entire message mustn’t 
exceed 160 characters. If the response SMS from the module would exceed 160 
characters, only the first 160 characters are transferred. In case of making typing or 
command mistakes, the following response SMS will be received: "

SYNTAX ERROR!

" and 

the command(s) will not be executed. 

 

Example: 

 

To set the first user phone number to be +36301234560, the first monitoring station 
phone number to be +36301234561 and the second SMS forwarding number to be 
+36301234562, type the following in the message: 

 

U1=+36301234560#

C1=+36301234561#

S2=+36301234562# 

 
To 

erase

 a previously set 

phone number

, leave the "

phone number

" part blank (eg.: to 

erase the second user phone number, type: 

U2=# 

). 

Содержание GSM Pager3 Z6





















Отзывы: