15
2.8 Reading the module’s version
Right after the connection is established successfully, the firmware version of the
connected module is automatically displayed in the upper right corner of the main
window.
From the example the following details can be read:
Type of the module:
GSM-Pager3 Z6
Firmware version:
v3.10
Firmware issue date:
07.09.2011
2.9 Remote control and status query through phone
The module can be controlled and status query can be performed after calling the
number of the SIM card placed in the module. When on-line, the following commands
are available using the phone’s keys:
Command Specification
Module
response
9
password
#
Entering module password
Password accepted: 3 beeps
Password denied: 4 low-tone beeps
0#
Disarm 3
beeps
1#
Arm 6
beeps
2#
Armed status query
Disarmed: 3 beeps
Armed: 6 beeps
4#
GSM signal strength query
Number of beeps according to the
actual GSM signal strength
3
RS
#
Control the relay output
R
: relay number:
1
S
: relay state:
0
= open,
1
= closed
Becomes open: 3 beeps
Becomes closed: 6 beeps
3
R
9#
Relay output state query
R
: relay number:
1
Open: 3 beeps
Closed: 6 beeps
800
M
#
Listen to voice messages
M
: voice message number:
1-8
Playing voice message
890
M
#
Record voice messages
M
: voice message number:
1-8
Long beep, then recording for 8
seconds, then long beep again
85
NN
#
Disable voice messages
(restore siren tone)
NN
: number of event:
01-14
01
: Z1 Alarm
08
: Z4 Restore
02
: Z1 Restore
09
: Z5 Alarm
03
: Z2 Alarm
10
: Z5 Restore
04
: Z2 Restore
11
: Z6 Alarm
05
: Z3 Alarm
12
: Z6 Restore
06
: Z3 Restore
13
: Arm
07
: Z4 Alarm
14
: Disarm
Successful operation: 3 beeps
Operation failed: 4 low-tone beeps
