tell GSM Gate Control Pro 1000, Инструкция по установке и эксплуатации

Страница: 20 / 40

20
5.3.6 Outgoing e-mail account
If you wish to use the e-mailing services of the system, it is necessary to configure the
outgoing e-mail account.
SMTP service - available options:
- Default : for sending e-mails, the system uses the Gmail account provided by the
manufacturer. In this case the system sends the notification e-mails and reports from the
following e-mail address:
noreply.gatecontrol@devicemail.net
- Gmail account : here you can configure a custom Gmail account to be used by the
system to send e-mails. In this case the system sends the notification e-mails and
reports from the e-mail address of the configured Gmail account.
When you finished c
onfiguring this option, use the “
Send test e-mail
”
button to send a
test e-mail and check if the function works.
5.3.7 Cameras
You can add to the Gate Control Pro system the availabilities of at most 2 IP cameras
which support the ONVIF standard. The system makes available the images of the
configured IP cameras in the smartphone application. Permission for viewing the images
can be configured in the editing window of the users, for each user separately and per
camera.
Camera URL : the image link of the IP camera
Camera type : the image transfer mode supported by the IP camera:
- Stream : video, continuous content
- Picture : still picture
This function works only with cameras that support the ONVIF standard!
The manufacturer does not guarantee that the
Gate Control Pro can be used with any
IP camera, therefore, still before purchasing the Gate Control Pro device, the
Gate Control smartphone application assures possibility to test the camera in advance and
make sure that your camera works properly with the Gate Control smartphone application
(further details are available
in the user’s guide of the smartphone application).
The list of ONVIF cameras tested by the manufacturer is available at www.tell.hu at the
Gate Control Pro
product’s downloads.
There are multiple
methods to obtain the camera URLs. You can use the “
ONVIF Detector
”
software made by the manufacturer (available on the manufacturer’s website:
www.tell.hu ),
the “
ONVIF Device Manager
” software (
http://sourceforge.net/projects/onvifdm ), or the
camera’s technical manual.
In order to access the camera pictures from outside your local network it is
necessary to replace the local IP address and port in the URL obtained using the
ONVIF URL detector program with the external (WAN) IP address of your router and
the external port, and after this enter the modified URL in the Gate Control Pro
programming software and write this into the module settings.