19
Online mode
: The system can be configured to connect to the internet online
(continuously), or to connect only occasionally, when needed. For online connection
continuous mobile internet connection is needed, which results in larger data traffic.
If online mode is enabled, the following services will be available:
- smartphone application
- remote programming
- remote firmware update,
In turn, if online mode is enabled, the system is unable to initiate outgoing calls,
therefore the following call-based functions will be unavailable:
- notification by call upon activating an input
- callback option
If online mode is disabled, the following e-mail functions will still be available, because
they do not require continuous internet connection:
- e-mail sending upon activating an input
- e-mail reports
- test report by e-mail
5.3.3 Call durations
Incoming call duration
: the time after which the system rejects the incoming calls can be
configured here in seconds. In case of entering value “0”, the system rejects the incoming
calls immediately after they are received.
Callback duration
: the system is able to confirm an incoming control call by calling back the
given number. Callback option can be enabled separately for each user. With this setting it
can be configured how long the system should ring the user’s phone when calling back.
When this time expires, the system ends the call automatically. This option is not available
id “
Online mode
” is enabled!
5.3.4 Servers
If you wish to use the Internet-based services of the system (e-mail sending, remote
programming, remote firmware update, smartphone application), then it is necessary to
configure the availabilities of the Gate Control server(s).
The availabilities of the server provided free of charge by the manufacturer for this purpose
is the following:
Server address:
54.75.242.103
Server port:
2016
5.3.5 Test report
The system can send periodic test report by SMS and e-mail by the configured interval.
Phone number
: enter the phone number to which you wish to receive test report by SMS.
E-mail address
: enter the e-mail address to which you wish to receive test report. You can
enter multiple e-mail addresses separated by comma. If you wish to use the e-mailing
services of the system, it is necessary to configure the internet access and the outgoing e-
mail account settings.
Interval
: the interval of test report sending specified in days.
Time of day
: the time of day for test report sending.
