TELink
1400
Rev.
04/25/01
2.1 Front Panel Controls and Indications
Local Lamp
- Illuminates when the TELink 1400 is under local control
Status Lamp
-
STATUS Lamp
Indication
On
Audio present in memory and playing
Off
No power to unit or an error has
occurred
Flashing Slowly
No audio present in memory, phone line
free
Flashing Fast
Data session with PC Controller is active
Alternating - Fast Flash / No Flash
The TELink failed to validate the
callback number. Contact your dealer.
Handset Jack
- This connector (RJ-11) provides audio input from a special telephone handset for
loading Ads directly into the TELink 1400 locally. Not all telephone handset work properly, for best
results we recommend the following handset:
Walker Equipment Corporation
Highway 151 South
Ringgold, GA 30736
Model W3-K-M
LCD Display
- a 2-line by 16 character LCD display used to guide the user through recording and
activation of Ads.
Function Keys
- Context dependent keys used in conjunction with the LCD display to control unit
functions.
2.2 Rear Panel Controls and Connections
12Vdc
- To connect the external DC power pack.
Telco/Phone
- The Telco jack connects to the outside telephone line. The phone jack connects to
the internal telephone, fax machine or telephone system.
BGM In
- There are two separate audio paths through the TELink 1400, a “L” channel and a “R”
channel. Each channel is separate from the other allowing different audio source for each channel.
Audio Out
- The are two separate audio outputs, a “L” channel and a “R” channel. Depending upon
the Play Mode, these channels can operate in unison or as separate entities, playing BGM and Ads
on different intervals and schedules.
3. Telephone
Installation
If your messaging provider included other installation instructions, those instructions should be
followed first.
There are three installation procedures available:
