TELink
1400
Rev.
04/25/01
3.5 Final
Installation
After installation is complete, a Ad download may be required. Check the STATUS light on the front
panel.
While listening to the audio play over the sound system, adjust the volume on each BGM source,
the TELink, and/or the sound system as required to achieve the desired output level. Note: The
volume buttons on the TELink control the Ad volume only, not the BGM volume, which can only be
adjusted on the BGM source itself.
If you hear the BGM feed, but not Ads, this is not a malfunction. The TELink is likely waiting out the
time interval between Ad play. This delay can be anywhere from 0 seconds (no delay in between) to
9999 seconds (about 2 hours and 45 minutes). Check with your service provider to find out what
time interval has been set for your machine.
If there is no sound system output at all, go back and compare the connections against the
installation procedure used (A, B, or C), and check the BGM source and sound system for proper
operation. If you still have difficulty, contact your messaging provider.
