TELink
1400
Rev.
04/25/01
3.3 Telephone Installation Procedure C (Fax Share)
1. Make sure the power switch on the back of the TELink is OFF.
2. Connect one end of the included modular telephone cable directly to the phone company
box for the installation phone number. The TELink must be connected before the fax
machine. The user may need to adapt one end of the modular cable to mate to the
incoming phone line.
3. Connect the other end of the modular cable to the TELCO jack on the back of the TELink.
4. Using another modular telephone cable, connect the fax machine to the PHONE jack on the
back of the TELink.
5. Plug the included 12VDC power supply into a 110VAC wall outlet. Connect the other end to
the 12VDC jack on the back of the TELink.
6. Set the fax machine to answer on two or more rings. The messaging provider must set the
TELink to answer two rings AFTER the fax machine.
7. Turn the power switch ON. Proceed to Audio Installation section for further instructions.
3.4 Audio Installation
