66
Firmware Update
The software of the Multimeter can be updated directly via a USB flash drive, to
update the current software version to a desired software version.
Operating Steps:
1. Copy the update file to the USB flash drive.
2. Insert the USB flash drive to the USB host interface on the front panel of the
Multimeter.
3. Press
→
→
[
Test/Admin
]
→
[
Firmware Update
]
, then press
[
Browse
]
and select the update file. Next, press
[
Update
]
→
[
Yes
]
to start
updating the system software.
4. On completion of the firmware update, the screen will display the
message: “Firmware Update Done!”. You can now remove the USB flash
drive.
5. Restart the Multimeter and check the version information.
Press
→
→
[
System Setup
]
→
[
System Info
]
to check if the
software and hardware version after updating is in accordance with the
desired version. If not, the updating has failed, and you will need to update
once more using the above steps.
6. After checking, press
[
Done
]
to exit the system information interface.
NOTE:
Do not cut off the power whilst the instrument is updating.
Содержание T3DMM4-5
Страница 1: ...User Manual T3DMM4 5 Digital Multimeter ...