Teledyne CombiFlash EZ Prep, Руководство пользователя

Страница: 236 / 245

Teledyne Isco One Year Limited Warranty*
Factory Service for Teledyne Isco CombiFlash
®
Systems
This warranty exclusively covers Teledyne Isco
CombiFlash
®
instruments, providing a one-year limited
warranty covering parts and labor.
the customer will pay to return the instrument to Teledyne
Isco, and Teledyne Isco will pay surface transportation to
return the repaired instrument to the customer. Teledyne
Isco will not pay air freight or customer’s packing and
crating charges. This warranty does not cover loss, damage,
or defects resulting from transportation between the
customer’s facility and the repair facility.
Any instrument that fails during the warranty period due to
faulty parts or workmanship will be repaired at the factory at
no charge to the customer. Teledyne Isco’s exclusive
liability is limited to repair or replacement of defective
instruments. Teledy ne Isco is not liable for consequential
damages.
The warranty for any instrument is the one in effect on date
of shipment. The warranty period begins on the shipping
date, unless Teledy ne Isco agrees in writing to a different
date.
CombiFlash systems are designed to use Teledyne Isco
RediSep columns. RediSep columns lead the industry in
quality and performance. Customers may use other brands
of columns on their CombiFlash instruments. These non-
RediSep columns may fail to separate compounds, may leak
silica into the flow path of the CombiFlash instrument, and
may leak solvents from their fittings and seals.
Excluded from this warranty are normal wear; expendable
items such as charts, ribbon, lamps, tubing, and glassware;
fittings and wetted parts of valves; and damage due to
corrosion, misuse, accident, or lack of proper maintenance.
This warranty does not cover products not sold under the
Teledyne Isco trademark or for which any other warranty is
specifically stated.
Damage to CombiFlash instruments resulting from the
failure of a non-RediSep column may cause the need for
repairs that incur billable service activities. The customer is
responsible for these charges.
This warranty is expressly in lieu of all other warranties
and obligations and Teledyne Isco specifically disclaims
any warranty of merchantability or fitness for a
particular purpose.
Teledyne Isco will pay surface transportation charges both
ways within the 48 contiguous United States if the
instrument proves to be defective within 30 days of
shipment. Throughout the remainder of the warranty period,
The warrantor is Teledyne Isco, 4700 Superior, Lincoln,
NE 68504, U.S.A.
* This warranty applies to the USA and countries where Teledyne Isco does not have an authorized dealer. Customers in countries
outside the USA, where Teledyne Isco has an authorized dealer, should contact their Teledyne Isco dealer for warranty service.
Before returning any instrument for repair, please call, fax, or e-mail the Teledyne Isco Service
Department for instructions. Many problems can often be diagnosed and corrected over the
phone, or by e-mail, without returning the instrument to the factory.
Instruments needing factory repair should be packed carefully, preferably in the original carton,
and shipped to the attention of the service department. Small, non-fragile items can be sent by
insured parcel post.
PLEASE BE SURE TO ENCLOSE A NOTE EXPLAINING THE DEFECT.
Shipping Address: Teledyne Isco - Attention Repair Service
4700 Superior Street
Lincoln NE 68504 USA
Mailing address: Teledyne Isco
PO Box 82531
Lincoln NE 68501 USA
Phone: Repair service: (800)775-2965
(lab instruments)
(800)228-4373
(samplers & flow meters)
Sales & General Information (800)228-4373
(USA & Canada)
Fax: (402) 465-3001
Email: iscoservice@teledyne.com Web site: www.isco.com
February 28, 2012 P/N 60-2132-281 Rev D