Teledyne 501 TRS, Руководство по эксплуатации, Страница: 41 / 111

Teledyne API - T102/501 TRS, Addendum to T101 Operation Manual T102 OPERATING INSTRUCTIONS
39
6.2.2.
T102 Test Channel Output
The following table supersedes the Test Parameters Available for Analog Output A4
table in the Test Channel Output section in the T101 Manual - PN 07266
Table 6-3. Test Parameters Available for Analog Output A4
TEST CHANNEL TEST PARAMETER RANGE
1
NONE Test channel is turned off
PMT READING 0-5000 mV
UV READING 0-5000 mV
SAMPLE PRESSURE 0-40 in-Hg-A
SAMPLE FLOW 0-1000 cm³/min
RCELL TEMP 0-70° C
CHASSIS TEMP 0-70° C
IZS TEMP 0-70° C
PMT TEMP 0-50° C
CHASSIS TEMP 0-70° C
HVPS VOLTAGE 0-5000 V
1
This refers to the voltage range of the parameter and
not the output signal of the test channel.
Once a TEST function is selected, the instrument begins to report a signal on the A36
output and adds TEST= to the list of test functions viewable on the display (just before
the TIME display).
6.3.
SETUP – COMM: Setting Up the T102’s Communication Ports
6.3.1.
T102 ID Code
The default ID code for all T102 analyzers is 102 .
To edit the instrument’s ID code, see Analyzer ID Section of the T101 Manual - PN
07266.
6.3.2.
T102 Ethernet Host Name
The default name for all TAPI Model T102 analyzers is T102 .
To change the Ethernet Host Name see Changing the Analyzer’s HOSTNAME section in
the T101 Manual - PN 07266.
07267B DCN6485