Teledyne 501 TRS, Руководство по эксплуатации, Страница: 39 / 111

37
6.
T102 OPERATING INSTRUCTIONS
NOTE
For the most part the operation instruction for the T102are the same as those
described in Chapter 6 of the T101 Manual - PN 07266 with the exception that the
terms “TRS” & “total reduced sulfur” should be substituted for the terms “H
2
S” &
“hydrogen sulfide” unless otherwise stated in this addendum.
6.1.1.
T102 Analog Output Signals
The information contained in the available Analog Output Signals section in the T101
Manual - PN 07266 is correct except that the test channel output is located on analog
output
A3 rather than A4 .
ANALOG OUT
A1 A2 A3 A4
+ - + - + - + -
SO
2
concentration
outputs
HIGH range when
DUAL mode is selected
Test Channel
Not Used
LOW range when
DUAL mode is selected
Figure 6-1. Analog Output Connector
NOTE
On analyzers with the SO
2
-TRS multigas gas measurement option available, the outputs
of A1 and A2 correspond to:
Output SO
2
SO
2
– TRS TRS
Channel Mode Mode Mode
A1

SO
2

SO
2

TRS
A2

SO
2

TRS

TRS
07267B DCN6485