manualshive.com logo in svg

Teledyne 15-0800-074, Руководство пользователя

Поделиться
Скачать
Teledyne 15-0800-074 Скачать руководство пользователя страница 39

Versa User Manual 

 

www.teledynetekmar.com

Installation & Setup • Page 3-4

prepare Vials for sampling

1. Place the cap on a firm surface.
2. Insert the septum into the cap (avoid contamination of the septum face, the shiny Teflon® face should always be 

face-down toward the vial).

3. Place the septum and cap together on top of the vial opening.
4. Place the crimper on top of the capped vial with the crimp head resting on the cap.
5. Squeeze the crimper handles firmly in a slow and smooth motion, do not squeeze quickly.
6. Remove the crimper.
7. Check for a proper crimp seal by lightly rotating the cap. If some resistance exists, it is properly sealed.

spiking a Vial

Spiking a vial containing a fortification solution such as an internal standard, surrogate standard, or stock standard can 

be done prior to capping or after the vial is sealed. Both techniques have advantages and disadvantages.

Figure 3-4: Hand Crimper and Vial

Septum 

(Teflon® face 

down toward 

vial opening)

Cap

Sample Vial

Crimper

Содержание 15-0800-074








































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды