Teledyne 15-0800-074 Скачать руководство пользователя страница 10

Страница: 10 / 103

Versa User Manual

www.teledynetekmar.com

safety symbols

Never connect a flammable gas (such as hydrogen) as the gas supply to the Versa. Venting of this

gas in the standby creates an explosion hazard.

The interior of the instrument is an electrical shock hazard. Turn off the instrument and unplug the

power cord before removing the protective covers.

It is recommended that safety glasses be worn at all times when operating the Versa. Heated

sample vials are under pressure during normal operations. An inadvertent over-pressurization

could cause a vial to burst.

This instrument contains heating elements. Touching any heated zone during the operation

could cause a burn. The system’s heaters will activate when their setpoints are above ambient

temperatures. Keep all instrument panels fastened when operating the Versa.

Use extreme care when handling hot vials, particularly when unloading vials from the Versa.

Improper handling of hot vials may cause a burn.

Be alert for environmental, shock, or other hazards in the event that a vial would break. Before

cleaning up, unplug the instrument and determine the nature of the sample that has spilled. Use

extreme caution and apply the appropriate clean-up measures.

Do not over pressurize or over heat samples during operation. Extreme static pressure

build-up in a vial due to excess pressure levels or heat settings could cause a vial to burst.

When accessing the valve oven area, be certain that the valve is cool before opening the cover.

Pinch Point Hazard! Keep hands and other appendages away from the carousel and elevator

during operation.

Warnings

Introduction • Page 1-3

Содержание 15-0800-074








































































































Результаты поиска

Содержание 15-0800-074

Отзывы:

Бренды по названию

Популярные бренды

Teledyne 15-0800-074, Руководство пользователя

Результаты поиска

Содержание 15-0800-074

Отзывы:

Бренды по названию

Популярные бренды