Installation instructions
│
T24
│
Chapter 10: Battery
CHARGER
1
M769755
M769780
M769746
Description
Table/wall
charger battery
M245060
AC adapter to be used
with M769755
DC adapter
2
to be
used with M769755
Input/output
power
5 V DC, 10 % (1A) 110 – 240 V AC /
5 V DC
12 – 24 V DC / 5 V DC
Weight (typical)
0.12 kg (0.26 lbs) –
0.11 kg (0.25 lbs)
Dimensions
90 x 25 x 135 mm
(3.5 x 1 x 5.3 in)
–
–
Other
Can be wall-
mounted
Supplied with
multiple connector
types
–
NOTE: M769755 must be purchased together with an adapter, either AC (M769780)
or DC (M769746).
NOTE: Electronics and batteries must be physically separated before disposal.
Make sure that electronics or batteries are not disposed of in household waste.
1 0 .2 .1 C H A RG E T H E B A T T ERY I N T H E T A B L E C H A RG ER
NOTE: When approximately 10 % of a battery capacity remains, the corresponding
battery LED will light red.
1. Remove the battery from its compartment and place it in the Tele Radio AB
battery charger.
2. The charger's LED lights red while the battery is charging.
3. The charger's LED turns green when the battery is fully charged.
4. Put the battery back into the transmitter's corresponding compartment.
1
Purchased separately.
2
Car cigarette-lighter adapter
72
IM-PM-TX101-EN-v08
