Installation instructions
│
T24
│
Chapter 5: Product general description
5.6 Displ ay and displ ay LEDS
The transmitter is equipped with three LEDs providing information about battery
levels, radio link status and other status (see
).
The transmitter display is intended for receiving and visualizing feedback
information from the system as well as for basic configuration. The T24 transmitter
display has two
Function
buttons (Select and Back) and two
Navigation
buttons (Up
and Down).
1.
Back
button
2.
Select
button
3. Battery LED 1
4. Status LED
5. Battery LED 2
6.
Up
button
7.
Down
button
5 .6.1 DI S PL A Y L EDS
The transmitter display has three bi-color LEDs for status indication:
l
Battery LEDs 1–2 are for battery 1 and battery 2 indications respectively.
Green means that the battery level is good while red indicates that the
battery level is low. When the battery LED turns red, the corresponding
battery should be changed / recharged at the next convenient opportunity.
l
Status LED is for radio link and system information.
For more information about status and error indications, see
5 .6.2 MES S A G E T YPES O N T H E DI S PL A Y
Error /F ail mes s ages
”Error”/”Fail” messages are shown on a red background and indicate a fatal error.
”Error”/”Fail” messages are displayed until the transmitter is turned off (after
expiration of the inactivity period or manual stop by the user).
S u c c es s mes s ages
”Success” messages are shown on a green background and indicate that an
operation has succeeded. ”Success” messages messages are displayed until the
IM-PM-TX101-EN-v08
25
