Installation instructions
│
T24
│
Chapter 9: Configuration menu
9.3 .2 S O F T W A RE V ERS I O N S W 0 0 3 3 -1 1 V 0 9 O R L O W ER
1. Make sure that the
Stop
button is pressed.
2. Twist and release the
Stop
button.
The initial start-up logo is displayed.
Battery indicator(s) light(s).
The
display shows:
[Session Selection]
3. Press and hold side button
SBX2
(middle button on the right side of the
transmitter).
4. Press the
Stop
button.
5. Release side button
SBX2
.
The display shows:
[Config Menu PIN 0000]
6. Enter the first digit using the
Up/Down
buttons.
NOTE: Once the
Select
button has been pressed, it is not possible to move
back to the previous digit. Pressing the
Back
button will abort the
procedure.
7. Press the
Select
button to accept and move to the next digit.
8. Repeat steps 6–7 until all four digits have been entered.
9. Press the
Back
button to accept.
l
If the entered PIN code is correct:
The display returns to the menu list.
l
If the entered PIN code is incorrect:
The display shows:
[Config Menu PIN Incorrect PIN entered,
shutting down device]
. The transmitter turns off.
Go back to step 1 and try again.
IM-PM-TX101-EN-v08
51
