Installation instructions
│
T24
│
Chapter 9: Configuration menu
9.4 Register a transmitter in a receiver
Registering means establishing communication between the transmitter and the
receiver.
T24 transmitters can have up to 32 registered receivers (locations 1–32).
NOTE: The registration instructions require access to the receiver housing. For the
registration procedure to be successful, the receiver must be powered up.
RISK OF UNINTENDED EQUIPMENT OPERATION
Only transmitters that are intended for use should be registered in the
receiver.
Failure to follow these instructions could result in death, serious injury,
or equipment damage.
RISK OF UNINTENDED EQUIPMENT OPERATION
Do not perform this action when the receiver is in a session with another
transmitter. The radio communication may be interrupted or broken.
Failure to follow these instructions could result in death, serious injury,
or equipment damage.
52
IM-PM-TX101-EN-v08
