Installation instructions
│
T24
│
Chapter 8: Operation
The display shows:
[Select one or more items]
and the list of registered
receivers. Selected receivers are marked with a + sign.
If the correct receiver is already selected
l
Press the
Back
button.
The display shows:
[Session Selection]
l
Proceed to step 10.
To select/change receiver(s):
l
Proceed to next step.
6. Choose the receiver(s) to operate using the
Up/Down
buttons.
7. Press the
Select
button to select.
A + sign is displayed in front of the selected receiver.
8. Repeat step(s) 6–7 if necessary.
9. Press the
Back
button to accept.
The display shows:
[Session Selection]
10. Press and hold both
Start
buttons simultaneously for one second.
The buzzer emits a beep.
11. Release both
Start
buttons.
The Status LED flashes rapidly while waiting for the receiver confirmation.
l
If the transmitter has already been logged in to the receiver:
The display shows:
[Logging in…]
The transmitter logs in to the receiver in which it has been
registered in. The Status LED lights green.
l
If the transmitter has not been logged in to the receiver:
The display shows:
[Login failed. No receivers selected for
session.]
The transmitter turns off.
Start the transmitter again and log in to a receiver before
proceeding with the start-up procedure (
).
NOTE: If the paired receiver is not detected within 30 s, the login process is
canceled.
The display shows:
[Login failed. Timout. Receiver HY-RX-
xxxx]
and the transmitter turns off.
12. Proceed with the functional test (see
).
IM-PM-TX101-EN-v08
45
