Tektronix TekRanger 2 TFS3031 Скачать руководство пользователя страница 19

Страница: 19 / 272

General Safety Summary

xiv

TFS3031 TekRanger/TekRanger 2 Service Manual

Replace Batteries Properly.

Replace batteries only with the proper type and rating

specified.

Recharge Batteries Properly.

Recharge batteries for the recommended charge

cycle only.

Use Proper AC Adapter.

Use only the AC adapter specified for this product.

Do Not Operate Without Covers.

Do not operate this product with covers or panels

removed.

Use Proper Fuse.

Use only the fuse type and rating specified for this product.

Avoid Exposed Circuitry.

Do not touch exposed connections and components

when power is present.

Wear Eye Protection.

Wear eye protection if exposure to high-intensity rays or

laser radiation exists.

Do Not Operate With Suspected Failures.

If you suspect there is damage to this

product, have it inspected by qualified service personnel.

Do Not Operate in an Explosive Atmosphere.

To avoid fire hazard, use only the power cord specified for this product.

To avoid electric shock or fire hazard, do not operate this product with covers or
panels removed.

To avoid injury or fire hazard, do not operate this product in an explosive
atmosphere.

This product is designed to operate from an internal, rechargeable nickel-cad-
mium (NiCad) battery, or an external power/charger adapter rated at 9 to 16 volts
DC, 40 watts.

Use only the power/charger adapter that is specified for the TFS3031.

CAUTION.

The power/charger adapter is not hermetically sealed. Do not expose

it to moisture, which can penetrate and destroy it.

To Avoid Fire or

Personal Injury

Use Proper Power Cord

Do Not Operate Without

Covers

Do Not Operate in

Explosive Atmosphere

Power Sources

External Power

Содержание TekRanger 2 TFS3031

















































































































































































































































































Результаты поиска

Содержание TekRanger 2 TFS3031

Отзывы:

Похожие инструкции для TekRanger 2 TFS3031

Бренды по названию

Популярные бренды

Tektronix TekRanger 2 TFS3031, Руководство по обслуживанию

Результаты поиска

Содержание TekRanger 2 TFS3031

Отзывы:

Похожие инструкции для TekRanger 2 TFS3031

Бренды по названию

Популярные бренды