Tektronix TekRanger 2 TFS3031, Руководство по обслуживанию

Страница: 105 / 272

Specifications – TekRanger 2 (serial nos. B052000 and above)
1–82
TFS3031 TekRanger/TekRanger 2 Service Manual
Table 1–101: Sample Density, Pulsewidth, and Range Combinations (Standard 1550 nm Singlemode, Option 06)
Pulsewidth Bandwidth
1
Overview
Sample
Overview
Interleave
Overview Measurement Spans (km)
Minimum
High
Density
(m) (MHz)
1
Sample
Spacing
2
Interleave
Factor
3
160 80 40 20 8 4 2 1
Density
Sample
Spacing
2000 0.3 40 m 1x D D D D 1.25 m
1000 0.3 40 m 1x D D D D D 1.25 m
500 0.3 20 m 1x D D D D D D 1.25 m
200 5 20 m 1x D D D D D D 1.25 m
100 5 10 m 1x D D D D D D 1.25 m
50 5 10 m 1x D D D D D D D 1.25 m
20 17 5 m 2x D D D D D D D 1.25 m
10 17 2.5 m 4x D D D D D 1.25 m
5 17 1.25 m 8x D D D D D 1.25 m
1 35 25 cm 40x D D D 25 cm
Note 1: Bandwidth is chosen based on a 3x minimum bandwidth required for pulsewidth resolution. The minimum bandwidth is
given by
b +
0.35
Ă (
)Ă
Ă 10Ă ń
Note 2: Sample spacing is chosen to obtain four data points on pulse.
Note 3: Interleave factor is based on a 10 MHz sampling rate.
Table 1–102: Bandwidth and Transient Characteristics (Standard 1550 nm Singlemode, Option 06)
Bandwidth (MHz) Risetime Fallslope
35 1 m = 10 ns 2.1 m/10 dB Controlled by
software Not directly
17 2 m = 21 ns 4.3 m/10 dB
software. Not directly
checked in the
5 7 m = 70 ns 14.7 m/10 dB
checked in the
performance
verification procedure
0.3 117 m = 1170 ns 245 m/ 10 dB
verification procedure.