Section 7: Make C-V measurements on a MOSCAP
Model 4200A-SCS Parameter Analyzer User's Manual
7-4
4200A-900-01 Rev. C / January 2019
Set up the measurements in Clarius
This section describes how to set up the Clarius application to make a C-V sweep on a MOS
capacitor. You select an existing project from the project library and configure a C-V sweep test.
For this example, you will use Clarius to:
Search for and select a project in the Project Library
Configure the test
Perform offset compensation
Run the test
View and analyze the test results
Search for and select a project
1. Choose
Select
.
Figure 87: Select highlighted
2. Select
Projects
.
3. Type
MOScap
into the search bar.
4. Select
Search
.
5. Select
MOS Capacitor C-V
project (
cvu-moscap
).
6. Select
Create
.
7. Select
Yes
when prompted to replace the existing project.
