manualshive.com logo in svg

Tektronix 2246 1Y, Руководство по обслуживанию


Поделиться
Скачать
background image

Section 8 - 2246 1Y/2246 MOD A

REPLACEABLE 

ELECTRICAL  PARTS

P A R T S   O R D E R IN G   IN F O R M A T IO N

Replacement  parts are available from  or through  your local 

Tektronix,  Inc,  Field  Office  or  representative.

Changes  to  Tektronix  instruments are  sometimes  made to 

accommodate  improved  components  as they  become available, 
and  to  give  you  the  benefit  of  the  latest  circuit  improvements 
developed  in  our  engineering  department.  It  is therefore impor­

tant, when  ordering parts, to include the following information in 
your  order:  Part  number,  instrument  type  or  number,  serial 
number,  and  modification  number  if  applicable.

If  a  part you have ordered  has been  replaced with  a new or 

improved part, your local Tektronix,  Inc. Field Office or represen­

tative will  contact  you  concerning  any  change  in  part  number.

Change  information,  if  any,  is  located  at  the  rear  of  this 

manual.

L IS T   O F   A S S E M B L IE S

A  list  of  assemblies  can  be  found  at  the  beginning  of  the 

Electrical Parts List. The assemblies arelistedin numerical order. 
When the complete component number of a part is known, this list 

will  identify the  assembly  in  which  the  part  is  located.

C R O S S   IN D E X -M F R .  C O D E   N U M B E R   T O

 

M A N U F A C T U R E R

The  Mfr.  Code  Number  to  Manufacturer  index  for  the 

Electrical  Parts  List  is  located  immediately  after this  page.  The 

Cross  Index  provides  codes,  names  and addresses of manufac­

turers  of  components  listed  in  the  Electrical  Parts  List.

A B B R E V IA T IO N S

Abbreviations conform to American National Standard Y1.1.

C O M P O N E N T   N U M B E R   (c o lu m n   one  of  th e

 

E lec trica l  Parts  List)

A  numbering  method  has  been  used to identify assemblies, 

subassemblies  and  parts.  Examples  of  this  numbering  method 
and  typical  expansions  are  illustrated  by the following:

Example  a.

A23R1234 

Assembly  number

component  number 

A23 

R1234

^

-----------

\

Circuit  number

Read:  Resistor  1234  of  Assembly  23

Example b.

A23A2R1234

component  number

A23 

A2 

R1234

Subassembly
number

V  

Circuit 

\n u m b e r

Read:  Resistor  1234  of  Subassembly  2  of  Assembly  23

Only  the  circuit  number  will  appear  on  the  diagrams  and 

circuit  board  illustrations.  Each  diagram  and  circuit  board 
illustration  is  clearly  marked  with  the  assembly  number. 
Assembly numbers  are also marked on the mechanical exploded 
views  located  in  the  Mechanical  Parts  List.  The  component 
number is obtained  by adding the assembly number prefix to the 
circuit  number.

The  Electrical  Parts  List  is  divided  and  arranged  by 

assemblies  in  numerical  sequence  (e.g.,  assembly  A1  with  its 
subassemblies  and  parts,  precedes  assembly  A2  with  its  sub- 
assemblies  and  parts).

Chassis-mounted  parts  have  no  assembly  number  prefix 

and  are  located  at  the  end  of the  Electrical  Parts  List.

T E K T R O N IX   P A R T   N O .  (c o lu m n   tw o   of  the

 

E lec trica l  Parts  List)

Indicates  part  number  to  be  used  when  ordering  replace­

ment  part  from  Tektronix.

S E R IA L /M O D E L  N O .  (c o lu m n s  th re e  and  fo u r

 

of  th e   E lec trica l  Parts  List)

Column  three  (3)  indicates the serial  number  at which  the 

part was first used. Column four (4) indicates the serial number at 
which the part was removed.  No serial  number entered indicates 
part  is  good  for all  serial  numbers.

N A M E   &  D E S C R IP T IO N   (c o lu m n   five  of  the

 

E lec trica l  P arts  List)

In  the  Parts  List,  an  Item  Name  is  separated  from  the 

description  by  a colon  (:).  Because of space limitations,  an  Item 
Name  may  sometimes  appear  as  incomplete.  For  further  Item 
Name identification, the U.S.  Federal Cataloging Handbook H6-1 
can  be  utilized where  possible.

M F R . C O D E  (c o lu m n  six of th e  E lec trica l Parts

 

List)

Indicates the code number of the actual manufacturer of the 

part.  (Code to  name  and  address  cross  reference  can  be found 
immediately  after this  page.)

M FR .  P A R T   N U M B E R   (c o lu m n   seven  of  the

 

E lec trica l  Parts  List)

Indicates  actual  manufacturers  part  number.

8-1

Содержание 2246 1Y


















































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2246 1Y

ICS ELECTRONICS 4803 Quick Start Manual preview
4803
Бренд: ICS ELECTRONICS Страницы: 6
YardCraft Polaris Assembly Manual preview
Polaris
Бренд: YardCraft Страницы: 17
Obdstar BT06 Instructions For Functions preview
BT06
Бренд: Obdstar Страницы: 10
Panasonic WJHD309 - DIGITAL DISK RECORDER Conversion Manualline preview
WJHD309 - DIGITAL DISK RECORDER
Бренд: Panasonic Страницы: 7
Panasonic WJ-ND300 Administrator Console Network Setup Manual preview
WJ-ND300 Administrator Console
Бренд: Panasonic Страницы: 24
Backyard Discovery BELMONT 2001039 Manual preview
BELMONT 2001039
Бренд: Backyard Discovery Страницы: 50
Backyard Discovery 6613 Owner'S Manual & Assembly Instructions preview
6613
Бренд: Backyard Discovery Страницы: 45
Backyard Discovery BEACH FRONT Owner'S Manual preview
BEACH FRONT
Бренд: Backyard Discovery Страницы: 70
BACtrack ELEMENT Product Manual preview
ELEMENT
Бренд: BACtrack Страницы: 16
Landoll 7430 Series Operator'S Manual preview
7430 Series
Бренд: Landoll Страницы: 70
Landice R9 Owner'S Manual preview
R9
Бренд: Landice Страницы: 19
Landice ElliptiMill Assembly Instructions Manual preview
ElliptiMill
Бренд: Landice Страницы: 7
Octane Fitness LX8000 Operator'S Manual preview
LX8000
Бренд: Octane Fitness Страницы: 20
Oceaneering C-Nav7050 User Manual preview
C-Nav7050
Бренд: Oceaneering Страницы: 27
Waters 2707 Quick Install Manual preview
2707
Бренд: Waters Страницы: 4
Waterpik ClearView Instructions For Use preview
ClearView
Бренд: Waterpik Страницы: 2
Olympus EVIS EXERA III Instructions Manual preview
EVIS EXERA III
Бренд: Olympus Страницы: 130
Kelso KCM65 Product Manual preview
KCM65
Бренд: Kelso Страницы: 21

Бренды по названию

Популярные бренды

Загрузить еще бренды