manualshive.com logo in svg

Tektronix 2246 1Y, Руководство по обслуживанию


Поделиться
Скачать
background image

Maintenance—2246  1Y  and  2246  Mod  A  Service

4.  Position  the  board  to  align  the  screw  holes  and 

install  the  six  Torx-head  attaching  screws  (two, 
5/8  in.  screws  in  the  center  and  one,  7/16  in. 
screw  at  each  co rn er).

5.  Plug  P2105  into  the  Potentiometer  board.

6.  Plug  in  ribbon  cables  P2501,  P2502,  P2302, 

P2304,  and  P2105.  Press  the  ribbon  cable  pins 
firmly  into  the  connector  holes.

A18  Power  Supply  Board

To  remove  the  Power  Supply  board:

1.  Remove  the  Processor  board  (see  Processor 

board  removal  procedure).

JW A R N IN ^J

To  a v o id   e le c t r ic a l  s h o c k ,  c a r e f u lly   d is c h a r g e

 

th e   c r t  a n o d e   le a d   d ir e c t ly   to   th e   m e t a l

 

c h a s s is .  To  a v o id   s t a t ic - d is c h a r g e   d a m a g e

 

to   e le c tr o n ic   c o m p o n e n t s ,   d o   n o t   a llo w   th e

 

a n o d e   le a d   to   d is c h a r g e   in t o   th e   a d ja c e n t

 

c ir c u it r y .

2.  Disconnect  the  high-voltage  anode  lead.  Pull the 

anode-lead  coupler  apart  slowly  and  carefully. 
DO  NOT touch  the  exposed  connector  pin  as  it  is 
withdrawn  from  coupler  socket.  Discharge  the 
exposed  anode  pin  to  the  metal  chassis  only.  A 
hole  is  provided  in  the  left  side  of the  power sup­
ply  chassis  for the  purpose  of  holding  the  end  of 

the  lead  to  prevent  a  recharge  while  it  is 
disconnected.

3.  Remove  the  eight  screws  holding  the  power sup­

ply  housing  shield  and  remove  the  shield.

4.  Disconnect  the  connectors  from  J2208  and 

J2225  and  the  two  wires  from  ac-line  filter. 

(Note  the  color  stripes  on  the  wires  to  the  line 

filter  for  reinstallation.)

5.  Pull  the  HV  connector  through  the  grommet  in 

the  power  supply  housing  and  remove  the  HV 
lead  and  P2208  cable  from  the  retaining  clip.

6.  Set  the  POWER  switch  in  the  OFF  (out)  position.

>  CAUTION  <

2 v w w w v «

T h e   P O W E R   s w it c h   m u s t   b e   in   th e   O F F

 

p o s it io n   to   s a f e ly   r e m o v e   th e   s h a f t   fr o m   th e

 

s h a f t   o f   th e   s w it c h   in   th e   fo llo w in g   s te p .

 

P u llin g   th e   s h a f t   o f f   w ith   th e   P O W E R   s w it c h

 

o n   m a y   d a m a g e   th e   s w it c h   s h a f t   a n d   s p r in g

 

a s s e m b ly .

7.  Remove 

the 

power-switch-extension 

shaft. 

Snap  the  extension  shaft  off  the  transitional  pivot 
assembly,  then  remove  the  shaft  by  prying  from 

the  switch  actuator.

8.  Remove the  six  screws that  hold  down  the  Power 

Supply  board.

9.  Unplug  the  Power  Supply  board  from  the  Main 

board  interface  connector.  Grasp  the  two  heat 
sinks  near  the  center  of  the  board,  one  with 
each  hand,  and  pull  up  to  disconnect  the  inter­
face  connection.

10.  Lift  the  front  of  Power  Supply  board  and  with­

draw  the  board  from  the  power-supply  housing.

To  install  the  Power  Supply  board:

11.  Place  the  Power  Supply  board  into  power-supply 

housing.  First,  guide  the  fuse  holder  into  the 
rear  panel,  then  lower the  front  end  of  the  board 
until  the  board  interface  pins  touch  the  interface 
connector.

12.  Plug  the  interface  pins  into  the  interface  con­

nector.  With  the  Power  Supply  board  against the 
rear  panel,  pull  up  on  the  large  electrolytic 
capacitor  (near  the  center  of  the  board)  with 
one  hand  and  push  down  on  HV  multiplier 
module  (at  front  of  board)  with  the  other  hand. 

This  action  tends  to  align  the  pins  with  the  con­

nector.  At  the  same  time  you  will  have  to  move 

the  board  around  slightly  so  that  the  pins  will 
easily  slide  into  the  connector  holes.  DO  NOT 
FORCE  this  connection,  otherwise you  may bend 

the  pins.

I   CAUTION  <

D o   n o t  e x c e e d

 

9 

i n - l b   o f   to r q u e   w h e n   t ig h te n ­

in g   th e   6 - 3 2   s c r e w s   t h a t   h o ld   th e   c ir c u it

 

b o a r d   to   th e   c h a s s is .  D a m a g e   to   th e   c ir c u it

 

b o a r d   o r   s c r e w   th r e a d s   m a y   r e s u lt   i f   th e

 

s c r e w s   a re   o v e r t ig h t e n e d .

6-41

Содержание 2246 1Y


















































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2246 1Y

Landoll 7430 Series Operator'S Manual preview
7430 Series
Бренд: Landoll Страницы: 70
Landice R9 Owner'S Manual preview
R9
Бренд: Landice Страницы: 19
Landice ElliptiMill Assembly Instructions Manual preview
ElliptiMill
Бренд: Landice Страницы: 7
Raymarine ST60+ SPEED INSTRUMENT Owner'S Handbook Manual preview
ST60+ SPEED INSTRUMENT
Бренд: Raymarine Страницы: 60
Raymarine Maxiview ST80 Operation Manual preview
Maxiview ST80
Бренд: Raymarine Страницы: 15
RaycoWylie i3500 Quick Start Manual preview
i3500
Бренд: RaycoWylie Страницы: 9
Raven SmarTrax Calibration & Operation Manual preview
SmarTrax
Бренд: Raven Страницы: 58
Raven Sidekick Pro Quick Installation Reference preview
Sidekick Pro
Бренд: Raven Страницы: 26
Ravo MP-10 Owner'S Manual preview
MP-10
Бренд: Ravo Страницы: 114
Alcoscan AL4000 User Manual preview
AL4000
Бренд: Alcoscan Страницы: 6
M-Audio Rack-mountable 8 x 8 USB 2.0 Interface with MX Core DSP Technology... User Manual preview
Rack-mountable 8 x 8 USB 2.0 Interface with MX Core DSP Technology...
Бренд: M-Audio Страницы: 25
Zimmer GED5000IL Series Installation And Operating Instructions Manual preview
GED5000IL Series
Бренд: Zimmer Страницы: 52
Phenix Technologies BK130 User Manual preview
BK130
Бренд: Phenix Technologies Страницы: 39
Triton ARGO G60 Installation Manual preview
ARGO G60
Бренд: Triton Страницы: 31
MadLab Bleep-o-tron Quick Start Manual preview
Bleep-o-tron
Бренд: MadLab Страницы: 7
Daihan Scientific HB-R48 Operation Manual preview
HB-R48
Бренд: Daihan Scientific Страницы: 27
R+M Suttner WEEDDEVIL ST-97 User Manual preview
WEEDDEVIL ST-97
Бренд: R+M Suttner Страницы: 16
Viking VK277 Instruction Manual preview
VK277
Бренд: Viking Страницы: 6

Бренды по названию

Популярные бренды

Загрузить еще бренды