manualshive.com logo in svg

Tektronix 2230, Руководство по обслуживанию

Набор конструктора Laser Pegs 2230 предлагает разнообразные модели, освещаемые яркими LED-светильниками. Инструкции по установке легко скачать бесплатно с веб-сайта manualshive.com. Руководство поможет собрать и настроить каждую модель быстро и легко. Вдохните жизнь в ваши конструкции с Laser Pegs 2230!

Поделиться
Скачать
background image

Theory of Operation— 2230 Service

When  reading  data  out  of  the  RAM,  the  Display  Con­

troller has  direct  access  to  the  memory  address  bus  (RA). 
RAM  row  and  column  addresses  to  be  read  from  are 
sequenced  through  in  order.  When  a  display  data  read  is 

taking  place,  the  dynamic  memory  is  refreshed  by  the 
Display Controller.

When  the  Display  Controller  has  completed  a  display 

frame,  it  signals  the  Microprocessor  (using  the  INTR  sig­
nal)  that  the  last  field  is  finished  and  awaiting  the  next 

frame  request.  After  the  interrupt  is  received,  the 

Microprocessor can  request the next frame (FRAME), then 

the  Display  Controller  resumes control  of the  RAM  for the 
next  frame  of  data.  When  PROC RQ  (U9208  pin 3)  is  HI, 
the  Display  Controller  is  in  the  middle  of  a  display  cycle 

and  the  Microprocessor  is  denied  access  to  the  display 
RAM.  The  Microprocessor  can  request  access  to  the 
Display  RAM  using  the  PROC RQ  (RAM  SEG)  signal  line 

to  either  write  in  new  waveform  data  or  read  out  data  for 
the  Communication  Option.  The  Display  Controller  allows 
the  Microprocessor  to  access  the  display  RAM  by  setting 
the  PROCEN  (U9208  pin 5)  signal  line  LO.  A  LO 
PROC EN  signal  enables  the  circuitry  that  allows  the  WR, 
PA14,  and  PA15  signals,  from  the  Microprocessor,  to con­

trol  the  display  RAM.  Even  though  the  memory  addresses 
are  under  control  of  the  Microprocessor,  the  RAS  and 
CAS signals  are generated by the  Display  Controller.

YDAC a n d   X DAC

Data from  display  controller  U9208  is  applied  to  X-  and 

Y-axis  DACs  U9210  and  U9220.  These  DACs  are  biased 
to  provide  output  currents  (approximately  0  to  2 mA)  pro­

portional  to  the  digital  data.  R9214  and  R9224  are  adjust­
ments  to  align  the  storage  signals  on  the  crt.  The  DAC 
currents  are  applied  to  the  Vector  Generator  along  with 
various control signals  from  U9208 via  W6100.

VECTOR  GENERATOR

V e c to r G e n e ra to rs

Vector  Generator  circuitry  is  shown  on  Diagram 20. 

U6303  and  U6304  convert  the  DAC  currents  into  bipolar 

voltages  (approximately  —2.5  V  to  +2.5 V)  which  are 
applied  to  sample  and  hold  circuits  U6305  and  U6306. 
Outputs  of  the  sample  and  hold  circuits  are  applied  to 
integrator  stages  U6307  and  U6308  through  electronic 
switches  in  U6301A  and  C.  The  integrator  output  signals 

are  continuously  fed  back  to  the  sample  and  hold  inputs, 
causing  these  input  voltages  to  be  equal  to  the  difference 
between the  drive  inputs  and  the  integrator  outputs.  When 

the  vector  sample  (VECT-SMPL)  control  line  (via  U6301B) 
is  actuated,  the  outputs  of  the  sample  and  hold  circuits 
store  these  difference  signals.  Since  the  integrator  output 
slopes  are  proportional  to  these  signals,  the  net  result  is 

to  effectively  “ connect  the  dots"  which  are  equivalent  to 
the digital data values.

These circuits  also have a  “ dot”  mode available  so that 

the  integrator  outputs  are  stepped  (dots)  rather  than  con­
tinuous  (vectors).  When  the  VECT/DOT  signal  is  LO, 
U6301A  and  C  switch  the  integrator  inputs  directly  to  the 
difference  signals  while  also  disconnecting  the  integration 

capacitors C6315 and C6314. The feedback loops are thus 
closed continuously, resulting in normal amplifier action.

Although  the  Vertical  and  Horizontal  vector  generators 

operate  the  same,  there  are some differences  between  the 
circuits  and  between  their signal characteristics.  To end  up 
with  the  proper signal  polarities  at  the  crt,  X  DAC  U9210 
(Horizontal)  current  is  from  2 mA  to  0  mA,  while  Y  ,DAC 
U9220  (Vertical)  current  is  from  0 mA  to  2 mA.  Also,  the 

vertical  integrator  output  is  - 2  V  to  + 2  V  while  the  hor­
izontal  integrator  output  is  —2.5 V  to  +2.5 V.  The 
reduced  vertical  dynamic  range  allows  proper  interface  to 

the  main  deflection  system.  Since  the  vertical  signal  even­
tually  passes  through  the  vertical  delay  line  before  reach­
ing the  crt,  it  is necessary  to delay the horizontal  signal as 
well.  This  is  done  in  the  vector  mode  by  delaying  slightly 

the  vector  sample  signal  applied  to  1)6305  via  R6320  and 
C6312.  In the dot mode the crt beam is  blanked  during the 
transitions  so the  dots  are only displayed  after  the  signals 
have  arrived and settled.

VECTOR  INTEGRATOR.  The  Y-axis  (vertical)  current 

from  the  D/A  Converter  goes  to  the  inverting  input  of 
operational  amplifier U6303. The  amplifier is  biased to pro­

duce  a  bipolar  output  voltage,  from  - 2 .5  V  to  +2.5 V, 
that  is  proportional to the input current.  Negative feedback 
from  the  parallel  combination  of  R6303  and  C6311  stabil­
izes the amplifier.

Biasing  of  the  non-inverting  input  of  both  the  X-axis 

and  the  Y-axis  amplifiers  is  identical  and  supplied  by  a 
resistive  divider  formed  by  R6304  and  R6305  between 

ground  and  the  +5  V  reference.  Both  resistors  are  equal 
valued  to  produce  a  bias  voltage  of  + 2.5 V.  Resistor 
R6308  provides  a  summing  node  for  the  input  vector 
current  and  the  feedback  current  and  develops  the  voltage 
on  the  inverting  input  of  U6303.  Full  current  range  of  the 
vector  signal  is  from  0  to  2 mA.  With  no  vector  current  in, 

the  feedback  current  supplies  the  full  current  through 

R6308,  and  the  output voltage  of  U6303  goes  to  - 2 .5  V. 

At  maximum  vector  current  input,  the  sum  of  the  current 
through  R3608  must  remain  the  same  as  with  no  vector 
current;  therefore  the  feedback  current  is  reduced  by  the 
amount  of the  vector current,  and  the  output  voltage  goes 

to  +2.5  V.

SAMPLE-AND-HOLD.  The  voltage  output  of  U6303  is 

applied  via  R6309  to  sample-and-hold  circuit  U6305. 
Sample-and-Hold  (S/H)  switching  is  controlled  by  the 
VECT SMPL  signal  from  the  Display  Controller  applied  to

3 -4 5

Содержание 2230




































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2230

Parker 6513 Technical Manual preview
6513
Бренд: Parker Страницы: 54
Panasonic AJSPD850P - P2 DECK Operating Instructions Manual preview
AJSPD850P - P2 DECK
Бренд: Panasonic Страницы: 73
CAMPAGNOLA HERCULES Quick Manual preview
HERCULES
Бренд: CAMPAGNOLA Страницы: 4
Danelec DM700 ECDIS Installation Manual preview
DM700 ECDIS
Бренд: Danelec Страницы: 67
Gardena T 1030 Opearting Instructions preview
T 1030
Бренд: Gardena Страницы: 19
Jackco 858 User Manual preview
858
Бренд: Jackco Страницы: 6
JB-Lighting P18 Operating Instructions Manual preview
P18
Бренд: JB-Lighting Страницы: 32
W&H MS Instructions For Use Manual preview
MS
Бренд: W&H Страницы: 72
UNIS CUBE II Operating Manual preview
CUBE II
Бренд: UNIS Страницы: 16
Unique Automation Bathomatic Basic User Manual preview
Bathomatic Basic
Бренд: Unique Automation Страницы: 10
Additel 762 User Manual preview
762
Бренд: Additel Страницы: 139
Radian Heart Guardian AED User Manual preview
Heart Guardian AED
Бренд: Radian Страницы: 36
Rational UltraVent XS Plus 6 2/3 E Original Installation Manual preview
UltraVent XS Plus 6 2/3 E
Бренд: Rational Страницы: 220
Stone RP522 Operator'S Manual preview
RP522
Бренд: Stone Страницы: 36
Scilogex DM 0412 User Manual preview
DM 0412
Бренд: Scilogex Страницы: 21
Sagitter ARROW 700 WASH User Manual preview
ARROW 700 WASH
Бренд: Sagitter Страницы: 12
Invacare TorqueTM 3 Parts Catalog preview
TorqueTM 3
Бренд: Invacare Страницы: 271
Beamz 151.265 Instruction Manual preview
151.265
Бренд: Beamz Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды