Programming Optional System Features
3. Click the
Apply
button to add the phone number to the list.
Create the list of locations to be monitored:
If a location is not checked in the
Locations
list, events from that location will not be
transmitted to the central monitoring facility.
1. Click on the
Edit
button in the
Locations
area.
2. Select which locations should be monitored by checking the boxes beside each
location.
3. Once all locations to be monitored have been selected, click
Apply
.
Select
File>Save Configuration
to save your programming changes.
HL7 Admission, Discharge, & Transfer Settings
The Tek-CARE
®
system is capable of integration with
Admission, Discharge, &
Transfer (ADT)
software using the
HL7 Standard
. If the facility uses ADT software, it
can be used to automatically input pertinent resident information into the Tek-CARE
®
system.
1.
To enable HL7 information transfer, open the
LS450
Config Tool
with the
LS576
Event Monitor
running in the background. In the Config Tool, click on
Residents
in the page selection pane, and find the
HL7 Settings
field. Click the
Edit
button
to unlock the field, and check the
Enabled
box. Ask the ADT system administrator
for the HL7
Port Number
, and type the port number into the
Port
:
box. Note
the HL7 port number below.
2.
HL7 Port Number
: _______________
3. Bed Override?
4. Click
Apply
to accept the changes.
Select
File>Save Configuration
to save your programming changes.
Versus
®
Badge System Integration
32 • IL948 Tek-CARE
®
500 & Tek-CARE
®
550 Installation Manual
Copyright © TekTone Sound & Signal Mfg., Inc. All Rights Reserved.
