TekTone Tek-CARE 550 Скачать руководство пользователя страница 38

Страница: 38 / 51

Programming Optional System Features

Add Custom Text Messages:

1. Choose

Staff

in the page selection pane of the Config Tool.

2. Click on the

Add (+)

button in the

Text Messages

pane.

3. Type a custom message in the

Details

area.

4. Check the

Has Subject

box to automatically include the calling location with

the message.

5. Select

staff type to send this message to just one staff type; select

None

to send this message to all staff types.

6. Click on the

Apply

button.

7. Repeat for each custom text message.

Select

File>Save Configuration

to save your programming changes.

Change Preprogrammed Text Messages

1. Choose an existing text message in the

Text Messages

pane and click the

Edit

button in the

Details

pane.

2. Modify the message in the

Details

pane and check the

Has Subject

box to

automatically include the calling location with the message.

3. Select a

Staff Type

to direct the message to a specific staff type or choose

None

to send the message to all staff types.

4. Click the

Apply

button to accept the changes.

Select

File>Save Configuration

to save your programming changes.

Delete Text Messages

To delete an unneeded text message, highlight the message in the Text

Messages

pane

and click the

Delete

button.

Select

File>Save Configuration

to save your programming changes.

Once all changes have been made, choose

File>Commit Configuration to System

write the changes to the Tek-CARE

system.

Configure Call Types and Hardware Types

These settings will not need to be altered for most installations.

The Config Tool’s

Call Types

page is used to change call-type specific behaviors, such

as priority and tones. You can also modify the system default call filters (All Calls, High

Priority Calls, No Calls, and Only Code), or add new call filters for use with staff and

pager assignments.
The

Hardware

page in the Config Tool is used to change or add station-specific

behaviors. For example, an SF502 can be a Call/Alarm Device or a Check-In Device.

Select

File>Save Configuration

to save your programming changes.

30 • IL948 Tek-CARE

500 & Tek-CARE

550 Installation Manual

Содержание Tek-CARE 550

















































Результаты поиска

Содержание Tek-CARE 550

Отзывы:

Бренды по названию

Популярные бренды

TekTone Tek-CARE 550, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Tek-CARE 550

Отзывы:

Бренды по названию

Популярные бренды