TekTone Tek-CARE 550 Скачать руководство пользователя страница 14

Страница: 14 / 51

System Installation and Setup

TekTone

Wireless System Setup Overview

The Tek-BRIDGE™ master station must be dedicated to the Tek-CARE

system. Due to

the critical nature of the system, do not run applications other than those associated

with the Tek-CARE

system on the Tek-BRIDGE™. Since the functions of the system are

critical, all power saving features of the Tek-BRIDGE™ have been disabled.
The software suite used on the Tek-BRIDGE™ includes two applications-

the

LS450

Config Tool

, used to set up the system and make programming changes to the existing

system and the

LS576

Event Monitor and Reporting System

, used to monitor all

calls and perform some system programming functions. The Event Monitor software

enables hospital staff to watch call activity, monitor system status, review resident

information, and much more.

The

Config Tool

performs the functions of initial system setup, programming gateways

and repeaters, and system customization. The Config Tool is normally used only during

initial system setup and system modification or maintenance. In certain situations,

transmitters can be added to the system though the Config Tool. The home screen of

the Config Tool is shown below

The

Event Monitor

is the software that hospital staff will interact with on a daily

basis. This application allows hospital staff to view system status, faults, troubles, and

incoming calls from transmitters. Some system programming functions may also be

performed using the Event Monitor software. The main Event Monitor will run on the

Tek-BRIDGE™, but the Tek-CARE

system provides for up to nine

LS586 Remote Event

Monitors

that may be installed on other facility PCs. These remote Event Monitors

are managed by the Tek-BRIDGE™ via the facility LAN. The remote Event Monitor

software is a supplemental system monitoring tool and must not be used as the primary

means of annunciation for the Tek-CARE

system. The Tek-CARE

system includes a

license for one Remote Event Monitor and is able to support up to nine Remote Event

Monitors. Contact TekTone

Customer Service to purchase additional Remote Event

Monitor licenses.

Open the Event Monitor software by double-clicking the

LS576 icon on the Tek-BRIDGE™ desktop:

Open the Config Tool software by double-clicking the

LS450 icon on the Tek-BRIDGE™ desktop:

6 • IL948 Tek-CARE

500 & Tek-CARE

550 Installation Manual

Содержание Tek-CARE 550

















































Результаты поиска

Содержание Tek-CARE 550

Отзывы:

Бренды по названию

Популярные бренды

TekTone Tek-CARE 550, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Tek-CARE 550

Отзывы:

Бренды по названию

Популярные бренды