Press
ok
to proceed, select
FAT
or
Cancel
, or press
EXIT
to leave without formatting.
Press
bLuE
DVR Set
to select recording type.
Select
REC & TMS
to store recordings and Timeshift copies to your HDD.
Select
Record
to store only recordings to your HDD.
Select
Timeshift
to switch recordings OFF. Only the Timeshift function is active.
noTE:
It is possible to use USB storage devices already formatted in NTFS.
Press
EXIT
to leave this menu.
7.6.3 Dvr setting
This menu allows you to configure settings for Timeshift, recording and playback.
Select
DVR Setting
in the
Media
menu and press
ok
to enter.
Use
pq
to move the highlight and
t
u
to change settings.
Timeshift
:
Select between
Auto
,
Pause
or
Off
. When
Timeshift
is set to
Auto
it will
automatically start every time after tuning to a channel. When
Timeshift
is set
to
Pause
it will start only after pressing the
YELLoW
/
2
button. Select
Off
to
deactivate Timeshift.
Step to
:
30 sec
to
30 min
. Set the time step you like to jump forward to by pressing
4
during playback of recorded files. This only works when the info banner is
displayed on screen. If it is not, press
Info
.
Time Shift to Record
:
If set to
On
the timeshifted part will be included in your recording when you
start to record the current programme.
PS Record
:
Select between
On
or
Off
. When
Off
is selected, recordings will also include
subtitles and Teletext (when available). Record to PS mode
On
allows
recordings without these extras and will need less space on your USB device.
Press
EXIT
to leave this menu.
7.6.4 remove usb device safely
Select
Remove USB device safely
from the tools menu and press
ok
. The receiver will display a
message indicating that you can safely remove your storage device from the receiver.
noTE:
After performing this function, the USB device is no longer accessible from
your receiver. To gain access to your storage device again, re-insert it or
switch the receiver to standby and on again.
A.1 Troubleshooting
There may be various reasons for abnormal operation of the receiver. Check the receiver according to
the procedures shown below. If the receiver does not work properly after checking it, please contact
your dealer or the local Service Hotline. Do NOT try to open or disassemble the receiver. It may cause
a dangerous situation and warranty will be void.
English
21
