![Tekcomm TCT2100 Скачать руководство пользователя страница 10](http://html1.mh-extra.com/html/tekcomm/tct2100/tct2100_user-manual_1076226010.webp)
16.
rECALL
Back to previously watched channel
17.
AuDIo
Opens the audio language selection
18.
Tv/rADIo
Toggles between TV or RADIO mode
19.
fAv
Opens the favourite group selection
20.
fILE
Opens the Media Player list
21.
TTX
Displays Teletext on the OSD (On Screen Display)
22.
subTITLE
Shows a list of subtitle languages
23.
5
6
Fast rewind/fast forward
24.
Coloured buttons
For Multimedia and Teletext functions
2.5 Installing the batteries
Fig. 4
Open the cover on the remote control and insert 2x AAA batteries into the compartment. Correct
position of the polar diagram shows the batteries inside the compartment.
1. Open the cover.
2. Insert the batteries.
3. Close the lid.
WArnInG:
The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries.
2.6 using the remote control
Fig. 5
To use the remote control, point it towards the front of your receiver. The remote control supports a
range of up to5 meters distance to the receiver at an angle of up to approx. 30 degrees.
noTE:
Managing the receiver will be limited or not possible if there are obstacles
between the remote control sensor (at the front panel of the receiver)
and the remote control. Direct sunlight or very bright light can reduce or
disturb the reception of the remote control signals.
3.0 ConnECTIons
3.1 Connecting to a terrestrial antenna
Fig. 6
To receive broadcasted signals, your terrestrial indoor or outdoor antenna must be connected to the
ANT IN connector on the back of the receiver. Use a properly shielded antenna cable and suitable
connectors.
6