noTE:
If the signals at your location are too weak to receive proper signals with
an indoor antenna, we recommend using an outdoor antenna which can
be pointed towards the transmission tower. Ask your local dealer for more
information.
3.2 Connecting to Tv with hDMI cable
Fig. 6
The TV set shall be connected with the receiver using a good quality HDMI cable. This connection
gives the highest possible quality.
3.3 Connecting to Tv with sCArT cable
Fig. 6
Your receiver is also equipped with a SCART connector; alternatively, the TV set can be connected to
the receiver using a good quality SCART cable.
3.4 Connecting to a digital audio amplifier and Tv using
hDMI
Fig. 6
By connecting your receiver to the latest digital amplifiers or Home Cinema systems you will enjoy
the best possible sound quality and multi-channel audio (depending on the broadcast). Connect the
HDMI output of the receiver to an input of your amplifier, and then connect the HDMI output of the
amplifier to your TV set. Select the correct input on your amplifier to watch and listen to programmes.
3.5 Connecting to an analogue Audio Amplifier
Fig. 7
Use an optional SCART to Cinch cable to connect your receiver to the analogue input of your Hi-Fi or
audio amplifier to achieve best possible analogue audio quality, (if SCART is not in use for Video)
3.6 Connecting a usb storage device
Fig. 8
Connecting a USB device to the unit allows you to playback movies, music and picture files which are
stored on it. See chapter
7.5.1. Mediaplayer
. Additionally, TV programmes can be recorded, put on
hold (Timeshift) and played. See chapter
6. operation
.
noTE:
It is recommended to use USB 2.0 storage devices or higher for recording
and playback of TV programmes or HD movies.
noTE:
Timeshift/recording and playback only work properly when a fast USB
storage device such as a USB2.0 HDD is connected to the receiver.
Timeshift/recording and playback of HD content require a sufficient read/
write speed of the used USB storage device.
English
7
