4.0 sTArTInG uP for ThE fIrsT TIME
When you use your receiver for the first time, the
Welcome
“Easy install” menu appears. Use
pq
to
move the highlight to the setting you wish to alter and use
t
u
to change values. Start by selecting
your language using
t
u
. Once you have selected your language, press
q
to move the highlight to
the next item and use
t
u
to change.
Language
Here you can choose your language.
Region
:
Select your region where this receiver is used.
Subtitle
:
Select
Normal
to display subtitles per default, Select
Hard of Hearing
to show
HoH subtitles per default. Select
Off
to hide subtitles per default.*
Aspect Mode
:
Use this option to select the aspect ratio of your TV and the preferred
conversion method. The options are:
Auto
(automatic detection of aspect
ratio),
4:3 Panscan
(Displays 16:9 widescreen broadcasts full screen on your
4:3 TV),
4:3 letterbox
(black bars on top and under the picture on a 4:3 TV) and
16:9
(use this setting for 16:9 TV sets).
Scan mode
:
Select
All
to store scrambled and free to air channels or select
Free
to store
only free to air channels. Note: Scrambled channels cannot be viewed with
this receiver.
Connection
:
Use this option to adjust the established connection to your TV set. Select
HDMI
or
TV SCART
.
* Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they can be activated via
Teletext, if available.
When all settings have been made, move the highlight to
OK
and press
ok
to continue.
noTE:
Wrong region selection can lead to missing channels or channels being
stored at wrong positions in the channel list.
The receiver will now advance to the
Aerial Adjustment
screen.
This part of the wizard is of great help when setting up your antenna system.
Use
pq
to move the highlight to the setting you wish to alter and use
t
u
to change values. The
following settings are available:
Antenna Power
:
Set to
On
if you use an active antenna. When set to
On
,5 V will be present at
the ANT IN connector of the receiver. Select
Off
for passive antennas.
Beeper
:
Select
On
for an audible indication of signal reception.
Off
turns the beeper
off.
Channel No.
:
Select a channel that is known to carry a broadcast in your region. The
Signal
Strength
and
Signal Quality
bars give a visual indication of the reception.
Adjust your antenna to obtain maximum signal strength and quality.
When all settings have been made, press
ok
to start scanning.
The receiver will search for all available channels now. Once scanning is finished, the receiver switches
to viewing mode.
TIP:
If the
Welcome
menu does not appear after switching on the receiver the first
time, reset the receiver to factory settings by pressing the
MEnu
button and
selecting
Load Factory Setting
in the submenu
Tools
.
(DEfAuLT PIn: 1234)
.
8
