7.2.3 Antenna Power
Use
pq
to select
Installation
, press
ok
or
u
to advance.
Use
pq
to select
Antenna Power
and press
ok
to enter.
Set to
On
if you use an active antenna.
Select
Off
for passive antennas.
When set to
On
,5 V will be present on the ANT IN connector of the receiver.
Press
EXIT
to leave the
Antenna Power
menu.
7.2.4 LCn (Logical Channel numbering)
If
LCN
(Logical Channel Numbering) is activated and an LCN signal is provided by the operator,
channels will be stored in the operator defined order. Set
LCN
to
On
to activate the operator defined
channel numbering or
Off
to store channels in the found order. This function only applies when a
new channel search is performed.
7.3 system setup
This menu allows you to manage the system settings of your receiver. It consists of the following
sub-menus:
Language
,
TV System
,
Local Time Setting
,
Timer Setting
,
Parental Lock
,
OSD Setting
and
Auto
Standby
.
Press
pq
to highlight the menu of choice and press
ok
advance to the next screen. Use
pq
to
move the highlight to the setting of choice. Values can be changed with
t
u
. Press
EXIT
to leave.
7.3.1 Language
This menu allows you to set up your language preferences.
Language
:
Use
t
u
to select the language for the On Screen Display.
First Audio
:
Use
t
u
to select Audio language.
Second Audio
:
Use
t
u
to select a language that will be played when the language selected
at
First Audio
isn’t available.
Subtitle Language
:
Use
t
u
to select the preferred subtitle language.
2nd Subtitle Language
: Use
t
u
to select the preferred 2nd subtitle language.
Teletext
:
Use
t
u
to select the preferred Teletext language (when available).
Subtitle
:
Use
t
u
to select the preferred subtitle type to be displayed automatically.
Select
Normal], {Hard of Hearing
or
Off
*
* Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they can be activated via
Teletext if available.
7.3.2 Tv system
Use this menu to match your receiver to your TV set. The following settings are available:
Video Resolution
:
Use this option to select the video resolution of your TV screen. The options
are:
By Source
(automatic detection of video resolution offered to the
receiver),
By Native TV
(automatic detection of maximal resolution of TV
screen), and manual selections
480i, 576i up to 1080p
. Use a setting that
matches the specifications of your TV. After a selection is made, you will be
asked to confirm. Selection above 576i is only applicable on HDMI output.
14
