7.4 Tools
Press
MEnu
in viewing mode to enter the
Main Menu
.
Select the
Tools
submenu with
pq
and press
ok
or
u
to enter.
Use
pq
to highlight the submenu of choice and press
ok
proceed.
Press
EXIT
to leave.
7.4.1 Information
This submenu shows receiver specific information such as hardware version and software version. It
also displays our web address www.tekcomm.tv. Please have the
Information
screen on hand when
you call our hotline. The person who answers your call might ask for the information given in this
screen.
7.4.2 Load factory settings
This option allows you to reset the receiver to factory settings, which clear all stored channels.
WArnInG:
By resetting your receiver to factory default, all your settings and stored
channels will be permanently deleted. Please use this option with care.
Use
pq
to select
Load Factory Settings
in the
Tools
menu and press
ok
. You are asked to input your
PIN code.
Input the correct PIN code using the
0~9
(DEfAuLT PIn: 1234)
. A confirmation window is displayed.
Select
Yes
to return to factory settings. Select
No
to cancel.
Press
EXIT
to leave.
7.4.3 s/W upgrade by oTA
This receiver is equipped with an Over The Air software upgrade function. An Over The Air update
might not be available in your region. Please visit our website www.tekcomm.tv or contact your local
service hotline for more information about this option.
7.4.4 upgrade by usb
This feature allows you to upgrade receiver software via the USB port. When new software is available
for your receiver, it can be downloaded from our website www.tekcomm.tv.
Place the software file (unzipped) in the root directory of your USB storage device (HDD, memory
stick etc.) and connect the device to the USB port of the receiver.
Select
Upgrade by USB
from the
Tools
menu and press
ok
to proceed.
The upgrade menu will now be displayed.
Use
pq
to select
Update Mode
and choose option
Allcode
.
Use
pq
to select
Upgrade File
and choose the file containing the latest and correct software.
When all settings have been made, move the highlight to
Start
and press
ok
to start the upgrade
process.
After a few seconds, the receiver asks: “Are you sure to burn flash?”. Select
Yes
to finalize the upgrade
or
No
to quit without upgrading.
English
17
