6.3 selection of audio language
Some channels support a choice of audio formats and/or languages. To select another audio stream,
press
AuDIo
in viewing mode. A list with available audio streams will now be displayed. Use
pq
to select a stream and confirm with
ok
. The audio channel as stereo, mono, left and right can be
selected with the
t
u
buttons.
6.4 Teletext
Your receiver includes a fully featured Teletext. To access Teletext, press the
TTX
button in viewing
mode and use the
0~9
buttons to input the number of the page you wish to see. The coloured
buttons of the remote control allow you to jump to selected pages directly, as indicated on the
bottom of the Teletext screen. Use the
pq
buttons to select one page up or down, use the
t
u
buttons to select subpages. Press
EXIT
or
TTX
to get back to viewing mode.
6.5 subtitles
Some channels support a choice of subtitle languages. Press
subTITLE
in viewing mode to display a
list of available subtitle languages. Select your subtitle of choice with
pq
and press
ok
to confirm.
Press
EXIT
to leave without making changes.*
* Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they can be activated via
Teletext if available.
6.6 Timeshift
Timeshift allows you to pause live broadcasts and resume playback later. To activate this function set
the Timeshift mode in the
DVR Setting
menu to on by selecting
Pause
. For details, see
7.6.3
. Press
2
in viewing mode to activate Timeshift. The progress information banner appears on screen. Live TV
keeps playing for moment and will then pause. Press
u
to resume Timeshifted playback. Press
sToP
to return to live TV.
noTE:
Timeshift and its playback only work properly when a fast USB storage
device such as a USB2.0 HDD is connected to the receiver. Timeshift and
playback of HD content requires sufficient read/write speed of the used
USB storage device .
6.7 EPG (Electronic Programme Guide)
The Electronic Programme Guide is a very useful function that allows you to view event schedules
and programme information and to mark events/movies for recording. To access the EPG, press the
EPG
button in viewing mode. Use
pq
to select a channel and
t
u
to select an event. Press
ok
to
display detailed information of the selected event. Use
EXIT
to quit the detailed information screen.
Press
rED
to access further step functions. Use
t
u
to select a step and
ok
to execute it. Press
EXIT
to quit the step function. Press
GrEEn
to set a timer for a selected event. Refer to section
7.3.4
for
details of the timer function.
noTE:
Availability of EPG data depends on the broadcast.
10
