Tegam 1830A, Инструкция по эксплуатации и обслуживанию

Страница: 46 / 66

10 TEGAM WAY • GENEVA, OHIO 44041 440-466- 6100 • FAX 440 -466- 6110 • www.tegam.com
4-30
Section IV – Operating Instructions
Error Code Description
00 No Error
10 Bad Command
The command sent was not recognized by the system
11 Bad Variable Name
The variable name used was not recognized by the
system
12 Bad Item Name
The item name used was not recognized by the system
13 Buffer size error
System buffers are not large enough to handle the
request
14 Read Only
The value that was attempted to be set, is read only
15 Format Wrong
The command format is incorrect
16 Bad Variable Index
The variable index is invalid
17 File Not Open
An attempt was made to write to a file that was not open
18 Thread Start Fail
A thread in the system failed to start correctly
19 Bad Variable Type
The variable type accessed is invalid
20 Serial Port Failed
The system failed to connect to or open the specified
serial port
21 TCP Port Failed
The system failed to bind to the specified serial port
22 Service Failed
The system failed to start the specified service
23 Failed to Open Memory
The system failed to open the required memory access
24 DIO Failed
The system failed to initialize the DIO ports
25 Value Out Of Range
The passed value is out of range for the system
26 Invalid Username
The username used to login to the system is invalid
27 Invalid Password
The password used to login to the system is invalid
28 System Is Locked
The system is currently locked to all access by another
user
29 Sensor Serial Number Length Too Long