10 TEGAM WAY • GENEVA, OHIO 44041
440-466-
6100 • FAX 440
-466-
2-1
Section II
–
Preparation for Use and Installation
Unpacking and Inspection
Each 1830A is put through a series of electrical and mechanical inspections before shipment to
the customer. Upon receipt of your instrument unpack all of the items from the shipping carton
and inspect for any damage that may have occurred during transit. Report any damaged items
to the shipping agent. Retain and use the original packing material for reshipment if necessary.
Upon Receipt, inspect the carton for the following items:
Model 1830A RF Power Meter
Model 1830A Operating and Service Manual (CD) P/N 1830A-901-01
Calibration Certificate
Power Cord
Mounting
The Model 1830A is shipped with four feet mounted to the bottom cover. When the Model
1830A is placed on a bench or table, these feet support the instrument. The Model 1830A
can also be rack
mounted in a standard 19” rack using the optional rack adapter kit 1830
-
910 for a single 1830A and kit 1830-
911 to rack two 1830A’s side
-by-side.
NOTE It is recommended to remove all 4 feet prior to rack mounting.
Use in Proper Environment
Normal calibration laboratory practice dictates that the environment should be closely controlled.
This will minimize errors introduced by temperature and humidity changes. A nominal
temperature as specified in Table 1.1 provides a good working condition. Controlled
temperatures also stabilize the aging process of the standards.
Do Not Use in Explosive Environments
CAUTION The 1830A is not designed for operation in explosive environments.
Do Not Block Air Vents on Rear Panel
CAUTION The Model 1830A has an air intake and exhaust on the back panel of the instrument.
When installing the Model 1830A, ensure there is at least two inches of space behind the
instrument for airflow. DO NOT set the instrument on its rear panel as its airflow will be
restricted and may result in damage to the internal circuitry.
Ensure Power Switch is Accessible
CAUTION Ensure that the POWER switch is easily accessible at all times and nothing is in place
that would impede proper use.
Do Not Operate Without Covers
WARNING This device should be operated with all panels and covers in place. Operation with
missing panels or covers could result in personal injury.
