Tegam 1830A, Инструкция по эксплуатации и обслуживанию

Страница: 25 / 66

10 TEGAM WAY • GENEVA, OHIO 44041 440-466- 6100 • FAX 440 -466- 6110 • www.tegam.com
4-9
Section IV – Operating Instructions
Cal Factor Tables menu
This menu is located within the SETUP menu. This menu allows the user to edit the sensor
calibration tables.
Cal Factor Tables menu contains 4 selections.
1. Load Cal Factor Table
2. Edit Cal Factor Table
3. Add Cal Factor Table
4. Delete Cal Factor Table
Load Cal Factor Table (Read/Write)
Located SETUP — Cal Factor Table menu. This control allows the user to see which sensor
calibration factor table is already loaded and also allows the user to load a new calibration
factor table from memory.
Edit Cal Factor Table (Read/Write)
Located SETUP — Cal Factor Table menu. This control allows the user to see which sensor
calibration factor table is already loaded and also allows the user to edit the calibration
active table calibration factor table from memory.
Add Cal Factor Table (Read/Write)
Located SETUP — Cal Factor Table menu. This control allows the user to manually add a
new calibration table into memory.
Delete Cal Factor Table (Read/Write)
Located SETUP — Cal Factor Table menu. This control allows the user to manually delete a
calibration table from memory.
Maintenance Menu
This menu is located in the SETUP menu. This menu allows the user access debug level
indicators as well as setup USB communication.
Maintenance menu contains 4 selections.
1. Debug Level
2. Channel 1
3. Channel 2
4. Heater Circuit
5. Max/Min Volts
6. Unit in Cal
7. USB-Serial
8. Cal Limits
Debug Level (Read Only)
Located SETUP — Maintenance menu. This indicator is used to tell the TEGAM developer a
digital code that represents a debug level. This indicator is used for development and is
not useful to the end user.