Tecomec GEOline 8410073, Инструкция и руководство пользователя

Страница: 42 / 68

ISOBUS ECU 1224 User and Instruction maual
|
P00801545 Rev:02 SW:1.0.0
41
10.2 Switch-On/Off the ISOBUS ECU 1224
ISOBUS ECU 1224 is automatically switched-on/off when the tractor is turned on/off. There is no
physical switch on the ECU
If the user turn-off the VT or disconnects it for any reason, the ISOBUS ECU 1224 automatically
puts the sprayer to a safe-state represented by the closing of the main valve (if a treatment is
running, it will be suspended). When the connection with the VT returns available, it is necessary
to manually resume any suspended treatment.
10.3 Execution of a Treatment
ISOBUS ECU 1224 controls spraying treatments, consisting in the distribution of a specific chemical
product on a field using the spraying boom.
Assuming that ISOBUS ECU 1224 was correctly configured (refer to section 10.3), to start a new
treatment the user shall maintain the open valve key pressed till a message box is shown
Figure 24requesting for a confirm about the starting of the new treatment.
Figure 31
If the user confirms, all the cumulative counters are reset (treated area and sprayed product) and
the new treatment is started by opening the main valve. In this phase the ISOBUS ECU 1224 also
creates a new record into its non-volatile memory that will contain all the treatment data. This
record will be updated during the current and all successive spraying activities, till a new
treatment is created in the same manner.
If the main valve is closed, the current treatment is not stopped but only suspended. The ending of
a treatment is automatically assumed when a new one is started using the above procedure. This
means that operator can continue the same treatment also over more days (case of a large field).