Tecomec GEOline 8410073, Инструкция и руководство пользователя, Страница: 47 / 68

ISOBUS ECU 1224 User and Instruction maual
|
P00801545 Rev:02 SW:1.0.0
46
If the tank level sensor is not installed, the user shall manually specify the new level of the tank.
This can be done by pressing the key that causes the showing of a dialog box where the user
can specify the new level.
Figure 36
10.8
Historical Treatments
ISOBUS ECU 1224 save into non-volatile memory data related to the last 10 treatment performed
by the sprayer.
All these data are always available and visible by accessing to the HISTORY page of the user
interface (refer to Chapter 9.5).
The current treatment is always the first record shown at the top of the list. All the others are
reported using a chronological order (the oldest one is at the bottom of the list).
If a new treatment is started when the maximum number of 10 records is reached, the oldest one
is deleted.
The information reported for each record, are the following:
•
Start Time/Index: date and time of the treatment start or treatment index (according to
“Clock Enabled” setting – refer to section 9.3.7)
•
Area: total amount of area covered (cumulative to all the sessions performed)
•
Volume: total amount of product distributed (cumulative to all the sessions performed)
•
Duration: total time (cumulative to all the sessions performed)