TECNA TE550, Инструкция по эксплуатации

Страница: 41 / 92

S.p.A.
ITEM TE550 Instruction manual
Example:
After a number of welding tests, the ensuing life of the electrodes resulted to be 4000 welding
spots and the following current values are required during the different moments of the
electrodes' life.
SPOTS PERFORMED REQUIRED CURRENT
0 (initial electrodes diameter) 15 kA
700 17.8 kA
1800 19.5 kA
3000 20.2 kA
4000 (end electrodes diameter) 20.7 kA
Therefore calculate the duration (in number of welding spots) and the percent increment of
each segment.
Keep in mind that the percent increment must always be calculated in relation to the
beginning of the segment being examined.
spots 700 = 0 - 700 = 1 segment of Duration
spots 1100 = 700 - 1800 = 2 segment of Duration
spots 1200 = 1800 - 3000 = 3 segment of Duration
spots 1000 = 3000 - 4000 = 4 segment of Duration
% 19 100
15
15 8 . 17
100 1 %
 

 


rent initialcur
rent initialcur endcurrent
segment Change
% 10 100
8 . 17
8 . 17 5 . 19
100 2 %
 

 


rent initialcur
rent initialcur endcurrent
segment Change
% 4 100
5 . 19
5 . 19 2 . 20
100 3 %
 

 


rent initialcur
rent initialcur endcurrent
segment Change
% 3 100
2 . 20
2 . 20 8 . 20
100 4 %
 

 


rent initialcur
rent initialcur enecurrent
segment Change
The following parameters are consequently set in the
STEPPER MENU :
PARAMETER PARAMETER DESCRIPTION VALUE
TOTAL STEPS Number of segments per stepper function 4
SPOTS 1 Number of spots of the first segment 700
INCREMENT1 Increment percent of first segment 19
SPOTS 2 Number of spots of the second segment 1100
INCREMENT2 Increment percent of second segment 10
SPOTS 3 Number of spots of the third segment 1200
INCREMENT3 Increment percent of third segment 4
SPOTS 4 Number of spots of the fourth segment 1000
INCREMENT4 Increment percent of fourth segment 3
41/92