TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
TECHNOMARK
1 Allée du développement
65
42350 La Talaudière (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : [email protected]
V : SJ
Le : 20/06/17 R : DD
www.technomark-marking.com
B.
Z Axis Sensor
Z
axis
Sensor
is an
electrical column
on which the marking head is installed. It will position the stylus
above the part at a
precise height
using a sensor feeling the part.
To use Z Axis sensor, you must first declare it as
accessory
of your marking machine. The maximum
course can be modified with the configuring accessory window:
The Stylus-part distance is defined for each marking file using the
marking parameters.
When marking using Z sensor accessory, the marking head moves first along XY for the first marking
point, then the column goes down to come and feel the part and position itself at the defined height.
During the marking you can define the upward movements of Z sensor (to avoid an obstacle for
example) using function
Z sensor upwards
When the machine reaches a
Z sensor upward
line, the column will lift the marking head of the
desired value.
Next line, the marking head moves first to the first marking point XY coordinates before the column
lower the head to feel and position the stylus at the right height.
C.
Electric Z Axis
Electric Z Axis
is an
electrical column
on which is located the marking head. It will position the stylus
above the part at a
given distance
with reference to the origin position of the column, value of the
position course.
