Technomark Multi4 V3 Скачать руководство пользователя страница 24

Страница: 24 / 85

TRAÇABILITÉ CRÉATIVE

CREATIVE TRACEABILITY

TECHNOMARK

1 Allée du développement

42350 La Talaudière (France)

Tel : +33 (0) 4 77 22 25 91

Fax : + 33 (0) 4 77 22 38 93

E-mail : [email protected]

V : SJ

Le : 20/06/17 R : DD

www.technomark-marking.com

Brackets “[”, “]” and no ASCII characters aren’t allowed in the text. Use the

UID codes

to add others

characters.

Speed

corresponds to the marking speed. Marking speed is different from the rest of the file marking

speed to obtain a quality suitable for code reading.

Code type corresponds to the two dimension code type to create: : Datamatrix STD (datamatrix
standard format), Datamatrix GS1 (datamatrix GS1 format) or QR.

Format

corresponds to the code format and depends on the

code type

selected.



Datamatrix: The code can be automatic (rectangle or square) or at a fixed format selected in
the list.



QR: The code is always square. Its size is automatic or defined by one of the format of the
list.

Format

defines the

code size

(number of elements) but as well the maximum number of characters

than can be encoded.

Datamatrix 16x16

Datamatrix 24x24

QR 21x21 QR 33x33

Bidirectional

corresponds to marking head’s movement. If this parameter is activated, the marking

head will move in both directions on the X or Y axis.

Axis

corresponds to the marking axis. By default it will be the X axis.

Auto cell size

corresponds to the size of datamatrix cells. If this parameter is activated, the 2D code

size is the same as the line’s height. If this parameter is disabled, the field

Value

is available.

Содержание Multi4 V3






















































































Результаты поиска

Содержание Multi4 V3

Отзывы:

Похожие инструкции для Multi4 V3

Бренды по названию

Популярные бренды

Technomark Multi4 V3, Руководство пользователя

Результаты поиска

Содержание Multi4 V3

Отзывы:

Похожие инструкции для Multi4 V3

Бренды по названию

Популярные бренды