Technomark Multi4 V3 Скачать руководство пользователя страница 44

Страница: 44 / 85

TRAÇABILITÉ CRÉATIVE

CREATIVE TRACEABILITY

TECHNOMARK

1 Allée du développement

42350 La Talaudière (France)

Tel : +33 (0) 4 77 22 25 91

Fax : + 33 (0) 4 77 22 38 93

E-mail : [email protected]

V : SJ

Le : 20/06/17 R : DD

www.technomark-marking.com

Open

Open allows opening a file from memory.

You can type the file name (or the first characters) in the allocated field, the right and left arrows
allow to move inside the text field. The corresponding file will be underlined in the list.

Files will be sorted alphabetically, lowercase names will be before uppercase names for files
beginning with the same letter.

The file can as well be selected using the up and down arrows to move in the list.

Select the file to open with

The wastebasket key deletes the selected file.

New

New allows creating a new file. This file will be empty.

USB

USB

allows importing and exporting files with a USB key. This button appears only if a USB key is

connected.

USB key must be formatted FAT or FAT32, in order to be recognised by the machine.

Text field

List

Comments

Содержание Multi4 V3






















































































Результаты поиска

Содержание Multi4 V3

Отзывы:

Похожие инструкции для Multi4 V3

Бренды по названию

Популярные бренды

Technomark Multi4 V3, Руководство пользователя

Результаты поиска

Содержание Multi4 V3

Отзывы:

Похожие инструкции для Multi4 V3

Бренды по названию

Популярные бренды