Technomark Multi4 V3 Скачать руководство пользователя страница 27

Страница: 27 / 85

TRAÇABILITÉ CRÉATIVE

CREATIVE TRACEABILITY

TECHNOMARK

1 Allée du développement

42350 La Talaudière (France)

Tel : +33 (0) 4 77 22 25 91

Fax : + 33 (0) 4 77 22 38 93

E-mail : [email protected]

V : SJ

Le : 20/06/17 R : DD

www.technomark-marking.com

Name

field correspond to the name of your variable. It must be unique and different from CB, CB1,

CB2 and VSHARED. If you edit an existing variable this field is grey as you cannot modify it.

Length

field correspond to the number of characters of the variable. If the value of the entered

variable is longer than

Length

, it will be shortened (cut) to the number of characters of

Length

Modifiable

field defines if a Production User can modify the variable. If

modifiable

is set to

, the

following field, Forcing

is not reachable.

Forcing

field allows changing the value of variable at each marking. It is then compulsory to enter a

value at each marking.

Value field is the actual value of the variable.

CB variables (CB, CB1 and CB2) settings present an additional field:

The allocation allows to define the way CB variables are fed when more than one are used.



Sequence: Variables are fed in the order they are scanned. The firs scan feed CB, the second
CB1 and the third CB2.



Length: bar code length corresponds to a variable length and the variable is fed with the read
content.

The maximum number of CB variables is 10 (CB, CB1… CB9).

The maximum number of serial number and variables accumulated in a file is 50.

If a variable is forced and non modifiable, it will be filled using a command via the RS232 serial link or
using a handheld scanner.

Variable value may be truncated using a special coding in the marking line. Insert code #AA,BB# next
variable code in the marking line where AA stands for the index of the first character used and BB the
last.

For example, to use only the third to the eighth characters from variable VAR value, the marking line
would be

As the variable VAR contain the text

ABCDEFGHIJKLMN,

the string

CDEFGH

will be marked.

If the variable contained separators, for example a slash “/”, can be cut them up in blocks with the
code

#S,AA#.

If the value of the CB variable is 123/456/789, you can get the second block with the following line.

Содержание Multi4 V3






















































































Результаты поиска

Содержание Multi4 V3

Отзывы:

Похожие инструкции для Multi4 V3

Бренды по названию

Популярные бренды

Technomark Multi4 V3, Руководство пользователя

Результаты поиска

Содержание Multi4 V3

Отзывы:

Похожие инструкции для Multi4 V3

Бренды по названию

Популярные бренды