Page
28
sur
47
TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
www.technomark-marking.com
Modèle du 29/10/2015
TECHNOMARK
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : [email protected]
IDI:
allows configuring the IDI mode for the current marking file. There are 3 IDI modes:
o
Off (no IDI)
o
IDI flat mode
o
IDI curved mode
For more information on the IDI use, please refer to
Forces – IDI
.
Mirroring mode
: allows to turn over horizontally or vertically the character marking (to be read as in a
mirror).
Vertical Mirror
Horizontal Mirror
Slashed Zero: allows choosing appearance of the digit zero. By default the zero digit is slashed, but it can
appear not slashed:
Slashed zeros
Non slashed zeros
Stylus Height: display the minimal/average/maximal measured values when the IDI stylus surveillance
function is activated.
This function is configured with the next window get by using right arrow of the keyboard on the settings
icon
o
State : enable or disable the function
o
Delta : tolerance value are spread between 0.5mm and 2.5mm
o
Learning: if the function is activated, the average height is calculated on the first 50 markings.
o
Height: have to be between 1.5mm and 9mm and filled it if the learning is disable.
When the function is activated, the marking machine will analyze obtained results during the marking and
memorize calculated values. If you go over the programmed distance (Delta), an alert is triggered.
Moreover, when the archiving function is activated the minimal, maximal and average values, number of
measures and standard deviation are registered in addition to other archive data.
