Page
25
sur
47
TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
www.technomark-marking.com
Modèle du 29/10/2015
TECHNOMARK
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : [email protected]
In this case, marking is done for the lines before the pause, and then the marking takes a break:
Use the commands
Start
and
Stop
to continue or stop the marking in progress (see Marking).
5.4.2.
Add
a
crossing
point
–
Pass
through
a
point
during
the
marking
It’s possible to force the head to pass through a defined point.
When a crossing point is creates, it is mark by an orange point.
In this example above, marking head will move according to the black arrows between the two marking lines
because there is a crossing point inserted, instead of use the red path.
Using a crossing point allows to define patterns to move the marking head which can be useful for parts with
complex shapes.
5.4.3.
Add
a
waiting
input
(16
‐
way
card)
A file line can be used to wait a specific state of an input.
If the concerned input state isn’t reach during the delay allowed, the marking is stopped.
The configuration of this function is done with the following window:
