Page
16
sur
47
TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
www.technomark-marking.com
Modèle du 29/10/2015
TECHNOMARK
3 Allée Michaël FARADAY
Parc d’activités STELYTEC
42400 SAINT-CHAMOND (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : [email protected]
To
insert
in a line an existing serial number (other than
new
), select it and confirm with
To
edit
an existing serial number (other choose than
new
), select it and press the right arrow on the keyboard. The
serial number configuration window appears.
To
create
a new serial number, select
new
and confirm with
. The serial number configuration window appears.
To
delete
a serial number, select it in the list and press the
delete
key on the keyboard.
The configuration window is the following (creation mode):
Illustration 6 : Serial number edition window
The
name
field corresponds to the name of your serial number. It has to be
unique
and different from S
HARED
. If
you edit an existing serial number, this field is grey because you can’t modify it.
The
Value
field is the
current value
of the serial number. It will be increase by the
step
value according to the
defined
frequency
(number of markings).
For example the
Value
2 will become 3 after 5 markings if the step is 1 and the frequency is 5.
Other example, the
Value
will change from 10 to 8 after 3 markings if the step is ‐2 and the
frequency
is 3.
The number of characters
(digits) shown in the field
Value
is very important because in the end the serial number
won’t have
more digits
than this one.
For example if the
Value
is 1, the serial number will increase until 9 then will start again to 1.
If the
Value
is 01, the serial number will increase until 99 then will start again to 01.
Remove the reference of a serial number in a line doesn’t delete the serial number.
