Technische Alternative UVR 63H, Руководство по эксплуатации и установке

Страница: 28 / 68

28
The basic control level
15.30
Set time.
The time is set by pressing enter  and the navigation keys  . Press the key
again to switch between minutes and hours.
Power reserve
in the event of a power failure: at least 1 day, typically 3 days.
TR
Temperature room sensor. If the room sensor RPT or RAS is used then it is im-
portant that the type is set to S1 RPT (or S1 RAS) in the sensor menu. Only then
can the position of the room sensor switch (operating mode) be processed correctly.
Notice
of an incorrectly set type of sensor: The correct temperature is only dis-
played in automatic operation. Other switch settings display excessive temperature
values (Factory settings fs = RPT).
TO
Outdoor temperature. The set flow temperature is calculated using the outdoor
temperature and on the basis of the heat curve.
TP
Flow temperature. In the ideal case the measured value exactly matches the set
value NP. If TP is less than NP the mixer is opened, if TP is greater than NP the
mixer is closed.
Set time Temperature
room sensor
Temperature
outside
Temperature
flow
Calculated set
flow temperature
Temperature
inputs 4-6
External value 1
Only displayed if
external DL is
activated
External value 9
Only displayed if
external DL is
activated
Status
heating circuit
controller
Mode
heating circuit
controller
Additional pa-
rameter for
mode (partially
hidden)
Required room
temperature in
lowering mode
Required room
temperature in
normal opera-
tion
Menu for enter-
ing the time
program
Entry to the
parameter menu
Par
Entry to the main
menu
Men